เครื่องรีไซเคิลโซเว้นท์รุ่น T - 400 ex solvent recovery machine

Feeding capacity: 400 liters
Electric Voltage: 220V/380V/32KW
Size: 1680X1400X2950mm
Net weight: 680 kg

T Series solvent recovery machine has the following advantages:

1. Explosion-proof Safety Design: Machine and components using explosion-proof safety design, products are qualified products by China National Supervision and Inspection Center explosion: Explosion-proof mark: ExdeIIBT3 / T4
2. Intelligent PID, PLC Digital Control System: Autonomous and independent research of PID, PLC control system, one of the most advanced operating control systems, automatically digital display control. Precise control of the temperature heating. Multi-program control can be set up for recycling different solvents, automatic production equipment without special care.
3. Specially Designed Electronic Control Box: Characteristics of explosion-proof operation mechanism, the security parameter can be set up without opening the control box, it is suitable for operating in an explosive-proof atmosphere! (in the course of running, the electric control box is prohibited to open under any circumstances)
4. Independent Seal Design: The sealing ring of the solvent recovery machine is produced independently-molding, which ensures that the solvent gas does not cause leakage and risk. Under normal operation, the washer is guaranteed for one year.
5. Body and Recycling Bins and Temperature Control: Barrel made of stainless steel, double-layer structure, indirect heating, reinforced lid design, precise 32 stages of temperature control, heating, steam recovery time digital display, explosion-proof, leak-proof, all-stainless steel body, easy to clean and maintain.
6. Vacuum Decompression Recovery Function (Optional): Standard vacuum pressure (pump) devices, heating, condensation, decompression, storage, combination of a variety of functions, the heating temperature is low, saving heating electricity; closed recycling, reduce volatile, prevent leakage; superior efficacy for recovery of volatile, decomposition, toxic and high boiling point solvents.
7. Automatic Feeding (Optional): Automatic feeding or manual control automatic feeding, without opening the cover; slag without opening the lid, after the recovery, automatic shutdown or remote delivery workplace, high efficiency, low solvent evaporation, low labor intensity.
8. Temperature-setting Shutdown Function: Temperature set, when the solvent has been done or the sensing temperature probe cannot feel the vapor, the device will automatically shut down, digital induction, high accuracy, can set a low 5-10 degrees off.
9. Time Off Function: The recovery time of the machine is set in advance, the operation time reaches the preset one, the device will stop the heating system. When the fan continues to run about 20 minutes, the machine will automatically stop. This function is to prepare for when there is residual vapor within the barrel, the steam from the pipe will run out causing safety problems if the power is cut off.
10. Ultra High Temperature Protection Function: Preset heating maximum temperature, when the temperature of the heat medium oil reaches the highest temperature, the high temperature protection red light will be on, the heater stops heating. This function is to ensure that the machine safely runs in the setting temperature range, to prevent the heating temperature from being too high.
11. Ultra High Voltage Protection Function: If pipes are clogged, the steam cannot discharge, when the barrel pressure exceeds 3kg, the safety valve on the lid will automatically open to relieve pressure, to ensure the safety of equipment and personnel.
12. Temperature Control System Damage Protection Function: During the operation of the machine, if the temperature control instrument is damaged, or sensing wire breaks down, the device will automatically stop working. When the recovery starts again, the device will not run to avoid solvent completely evaporating or accident due to continuous heating.
13. Anti Drying-out Function (Optional): The unique steam upper limit shutdown, and 5%-10% of solvent can be set aside, so that the solvent cannot be dried out completely, and the residue can be conveniently cleaned.

Optional features: You can choose a variety of functions and combine your needs rationally in order to achieve the desired treatment effect. There are air-cooling, water-cooling, under slagging, dumping type, vacuum decompression pump, automatic feeding, continuous feeding type, etc. If you have any questions, please feel free to contact us, thank you!